Weld Mesh
PAN ____
Application
used for Safety Fencing
Fastening
- weld mesh clip SSP 4520
- safety fence mesh retainer SSP 4515
Design tip
Standard widths and lengths offer an outstanding price/performance ratio and quick delivery.
Article
Article
Weld Mesh 40x40, galvanized, 461x1966mm
Add to cart
Weld Mesh 40x40, galvanized, 461x1966mm
PAN0461S4N
Not available
Weld Mesh 40x40, galvanized, 719x1966mm
Add to cart
Weld Mesh 40x40, galvanized, 719x1966mm
PAN0719S4N
Not available
Weld Mesh 40x40, galvanized, 977x1966mm
Add to cart
Weld Mesh 40x40, galvanized, 977x1966mm
PAN0977S4N
Not available
Weld Mesh 40x40, galvanized, 1450x1966mm
Add to cart
Weld Mesh 40x40, galvanized, 1450x1966mm
PAN1450S4N
Not available
Product Information
Material |
galvanized steel |
|---|---|
Weight |
|
Load types
Force impact
Distributed
Central
Load case
Supported on both sides
Supported on both sides
Supported on both sides, off-center
Clamped on both sides
Clamped on both sides
Clamped on both sides, off-center
Clamped on one side
Clamped on one side
Calculation values
Force F
NDistance L
mmDistance L1
Distance L2
Calculation result
| Deflection f | 0.00 | mm |
| Bending stress σ | 0.00 | N/mm² |
| Profile | Deflection f (mm) | Bending stress σ (N/mm²) |
|---|
Bending stress must not be greater than 50 N/mm²!
The deflection should not exceed 3 mm.
The calculations do not contain any certainty!
Summary
Profile: Weld Mesh Force impact: Distributed Extrusion alignment: Horizontal Load case: Supported on both sides Force F : 0 N Distance L : 0 mm Distance L1 : 0 mm Distance L2 : 0 mm
Dimensions
Calculation values
Panel height H
mm
Select:
Panel width B
mm
Select:
Calculation result
Enter panel width and height to check feasibility within the mesh grid – the decisive factor is the correct mesh grid protrusion to the aluminium profile. Panel dimensions match the mesh grid and the specified mesh grid protrusion. Panel dimensions not feasible – mesh grid protrusion to the aluminium profile too large or too small. Please select a dimension within the grid. The entered dimensions cannot be used. The minimum dimension is %s mm The maximum dimension is %s mm Panel height H Panel width B
Enter panel width and height to check feasibility within the mesh grid – the decisive factor is the correct mesh grid protrusion to the aluminium profile.
Summary
Panel height H: – Panel width B: – Weld Mesh height: – Weld Mesh width: – Inside height: – Inside width: – Mesh grid protrusion A: – Mesh grid protrusion B: –
CAD data
You don`t already have a user account? Register now for free or login here to download the CAD data.
